Accumulator Pre-Charging and Testing Equipment

Detailbild (copy 1)


(copy 2)

Pressure Transmitter - Type PT-RF

STAUFF PT-RF pressure transmitters are integrated into fluid technology plants and systems (temporarily or permanently) using the appropriate process connection adapters to measure and record temperature and pressure data. The energy required for a measurement is transferred to the pressure transmitter via the antenna of the STAUFF PT-RF reading device using wireless RFID technology. As a result the pressure transmitter requires neither internal nor external power supply, is completely maintenance free, and the recording process is automated therefore minimising the possibilities of human error. The pressure transmitter for the PT-RF along with the PT-RF reader is an ideal tool to check the pre-charge pressure of an accumulator fitted with a STAUFF SKK gas valve. Each PT-RF transmitter has its own identifiable serial number that can be recorded by the PT-RF reader, therefore each accumulator can be logged separately and the data can be downloaded to a computer at a later date.

(copy 3)

Reader - Type PT-RF

STAUFF PT-RF readers combined with STAUFF PT-RF transmitters are used to measure and record temperature and pressure data. The energy required for a measurement is transferred to the pressure transmitter via the antenna of the PT-RF reading device using wireless RFID technology. A maximum distance of only 1.5cm is required from the antenna to the tip of the PT-RF transmitter for the duration of the measurement. The PT-RF transmitter is activated by the press of a button (the measured value is determined within only 0.5 seconds), and then the data is transmitted immediately to the PT-RF reader together with additional relevant information, displayed on the screen and recorded. Over 15,000 measurement recordings can be stored in the internal memory of the device. The PT-RF reader along with PT-RF transmitter is an ideal tool to check the pre-charge pressure of an accumulator fitted with a STAUFF SKK gas valve. Each PT-RF transmitter has its own identifiable serial number that can be recorded by the PT-RF reader, therefore each accumulator can be logged separately and the data can be downloaded to a computer at a later date.