Accessories / Spare Parts

Detailbild


(copy 2)

Cutting Ring Type FI-S / FI-DS

Used in conjunction with Fitting Bodies and Union Nuts, Single-Edge and Double-Edge Cutting Rings of the FI-S and FI-DS series are essential to create a leak-tight connection

Characteristics and Features

  • Available in the Extra-Light, Light and Heavy Series according to ISO 8434-1 / DIN 2353
  • Suitable for nominal pressures up to 800 bar (depending on exact type and size)
  • Designed with a four-fold safety factor on the nominal pressure level

(copy 2)

Union Nut Type FI-M

Used in conjunction with Fitting Bodies and Single-Edge or Double-Edge Cutting Rings, Union Nuts of the FI-M series are essential to create a leak-tight connection

Characteristics and Features

  • Available in the Extra-Light, Light and Heavy Series according to ISO 8434-1 / DIN 2353
  • Suitable for nominal pressures up to 800 bar (depending on exact type and size)
  • Designed with a four-fold safety factor on the nominal pressure level

(copy 2)

Hexagon Lock Nut Type FI-SKM

Hexagon Lock Nuts of the FI-SKM series help to position and secure Straight and Elbow Bulkhead Fittings in a bulkhead

Characteristics and Features

  • Available in the Light and Heavy Series according to ISO 8434-1 / DIN 2353
  • Covers all thread sizes from M 12 x 1,5 to M 52 x 2

(copy 1)

Support Sleeve Type FI-VH

Support Sleeves of the FI-VH series are highly recommended and in some cases generally required to support thin-walled steel and stainless steel tubes as well as tubes made of non-ferrous metals (such as copper, brass, aluminium etc.) and plastics

Characteristics and Features

  • Standard material is Brass, consult STAUFF for alternative materials
  • Covers all metric tube sizes from 6 x 1 to 42 x 1.5

(copy 1)

Blanking Screw for Ports Type FI-VS

Blanking Screw for Ports of the FI-VS series facilitate the temporary and permanent closing of female threaded ports

Characteristics and Features

  • Suitable for nominal pressures up to 400 bar (depending on exact type and size)
  • Designed with a four-fold safety factor on the nominal pressure level
  • Suitable for almost all common thread types (e.g. Metric, BSP)
  • Various seal types (metallic, profile sealing rings and o-rings) available

(copy 2)

Blanking Plug for Tube Ends Type FI-VSK

Blanking Plugs for Tube Ends of the FI-VSK series facilitate the temporary and permanent closing of tube ends

Characteristics and Features

  • Available in the Light and Heavy Series according to ISO 8434-1 / DIN 2353
  • Suitable for nominal pressures up to 800 bar (depending on exact type and size)
  • Designed with a four-fold safety factor on the nominal pressure level


(copy 2)

Blanking Plug with 24° Taper / O-Ring (DKO) Type FI-VD

Blanking Plugs with 24° Taper / O-Ring (DKO) of the FI-VD series facilitate the temporary and permanent closing of fittings with a 24° conical bore

Characteristics and Features

  • Available in the Light and Heavy Series according to ISO 8434-1 / DIN 2353
  • Suitable for nominal pressures up to 800 bar (depending on exact type and size)
  • Designed with a four-fold safety factor on the nominal pressure level
  • Standard seal material is NBR (Buna-N®), consult STAUFF for alternative materials

(copy 2)

Thread Reducer Type FI-RED

Thread Reducers of the FI-RED series provide a simple solution to alter the thread size on any threaded connector

Characteristics and Features

  • Suitable for nominal pressures up to 630 bar (depending on exact type and size)
  • Designed with a four-fold safety factor on the nominal pressure level
  • Suitable for almost all common thread types (e.g. BSP)
  • Various seal types (metallic and profile sealing rings) available
  • Standard seal material is NBR (Buna-N®), consult STAUFF for alternative materials

(copy 2)

Profile Sealing Ring Type WDG

Profile Sealing Rings of the WDG series are used as elastomeric sealings for selected male threaded studs

Characteristics and Features

  • Used for male studs according to ISO 1179-2 (Type E) / ports according to ISO 1179-1
  • Used for male studs according to ISO 9974-2 (Type E) / ports according to ISO 9974-1
  • Standard seal material is NBR (Buna-N®), consult STAUFF for alternative materials


(copy 2)

O-Ring Type O-RING

O-Rings of the O-RING series are used as elastomeric sealings for selected male threaded studs and for various other sealing purposes (such as weld cones, flared cone adaptors, banjo bolts

Characteristics and Features

  • Used for male studs according to ISO 6149-2/-3 / ports according to ISO 6149-1
  • Used for male studs according to ISO 11926-2/-3 / ports according to ISO 11926-1
  • Used for fittings with 24° taper (DKO) and 24° weld cones
  • Used for 24°/37° flared cone adaptors
  • Used for banjo bolts of banjo fittings
  • Standard seal material is NBR (Buna-N®), consult STAUFF for alternative materials

(copy 2)

Internal Metallic Sealing Ring Type FI-DKI

Internal Metallic Sealing Rings of the FI-DKI series are used as metal sealings for female studs of gauge fittings

Characteristics and Features

  • Covers all thread sizes from G 1/4 to G 1/2

(copy 2)

External Metallic Sealing Ring Type FI-DKR

External Metallic Sealing Rings of the FI-DKR series are used as metal sealings for male studs of banjo fittings

Characteristics and Features

  • Covers all thread sizes from M 8 x 1 to M 4 2 x2 and from G 1/8 to G 1-1/2

(copy 1)

Retaining Ring with Captive Seal Type FI-DIR

Retaining Rings with Captive Seal of the FI-DIR series are used as sealings for male studs of banjo fittings

Characteristics and Features

  • Covers all thread sizes from M 10 x 1 to M 4 2 x2 and from G 1/8 to G 1-1/2