STAUFF Press Hand Pump

Detailbild


Left column

STAUFF Press Hand Pump

The STAUFF Press - Hand Pump manual pre-assembly device consists of a hand-pump pressure unit with a working piston and a pushing head. For assembly, one tool set is required per tube outside diameter. The assembly is carried out with pumping movements of the assembly lever. The STAUFF Press - Hand Pump assembly device also supports the correct pre-assembly result with a pressure gauge.

The following can be pre-assembled:

  • ES-4 cutting rings for a 6 - 42 mm outside tube diameter
  • 2S cutting rings for a 6 - 42 mm outside tube diameter
  • BV-10 flared cones for a 6 - 42 mm outside tube diameter
  • All other cutting rings in accordance with the valid standards
    (DIN EN ISO 8434-1)

As a manual device it can be used on site. However, for frequent assemblies, clamping in a vice is recommended. The offset side surfaces of the base plate enable firm centering in the vice jaws.