STAUFF Press Flare & Pre-Assembly Machine


Left column

STAUFF Press Flare & Pre-Assembly Machine

The STAUFF Press flare & pre-assembly unit is designed for a leak free assembly of flaring or cutting ring fittings on tube or hose ends with minimum training of operators.


  • Low, medium and high-pressure hoses, even for special applications
  • Wide range of fittings, couplings, adaptors and hose ends
  • Ready-made hose assemblies
  • Stationary and portable hose crimping machines and equipment
  • Tooling is also available for flaring and pre-setting
  • Universally usable for pre-setting metric cutting ring assembly and flaring
    inch tubes.
  • Suitable for all tube/pipe diameters from 6 to 42 mm, and 1/4” to 1 1/2” O.D.
  • Absolute leakage-free assembly due to accurate pressure adjustment.
  • Considerable reduction of times and cost for assembly.
  • Short set-up times when changing the tube/pipe diameter or the fitting type