Suction Strainers SUS

(copy 1)

Left column (copy 3)

STAUFF Suction Strainers SUS

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir

▪ Available with female BSP thread (ISO 228)
  or female NPT thread (ANSI B1.20.1)

▪ Threaded end cap made of glass-fibre reinforced
  Polyamide (PA) or Aluminium
▪ Lower end cap and support tube made of Steel, zinc-plated
▪ Standard filter material is Stainless Steel Mesh (125 μm);
  alternative micron ratings of 60 μm and 250 μm on request

Consult STAUFF for alternative materials.

Media Compatibility
▪ Suitable for use with Mineral and Petroleum based    
  hydraulic fluids (HL and HLP)

Technical Data
▪ Operating temperature range:
  -20 °C ... +100 °C / -4 °F ... +212 °F

(copy 3)


▪ Integrated bypass valve with an opening pressure
  of  0,2 bar (3 PSI) to reduce the risks of high-pressure
  drops that can be caused by contaminated strainer
  elements or high-viscosity fluids

Special sizes, designs, materials and configurations
are available on request. Consult STAUFF for details.

Privacy Settings
We use cookies on this website. These include cookies that are technically necessary for the operation of the site. In addition, we would like to measure the use of our website - provided your consent is given. Your consent is voluntary and can be withdrawn at any time. You can find more information in our privacy policy.Legal note

We use cookies for basic functionality. Your cookie settings are saved using a cookie, for example.
We use Google Analytcs to measure how our website is used. Google Analytics might set the following cookies: __utma, __utmt, __utmb, __utmc, __utmz, and __utmv.
Cookie Preferences